OSHA Electric Power Standards E-Learning Course

About OSHA Electric Power Standards – Self-Paced E-Learning Course

When it comes to reading and understanding OSHA Electric Power regulations, it can be challenging to say the least. It requires reading through many pages of regulatory language trying to not only understand the requirements, but also glean from the document all of the key and crucial elements that relate to the work that you do.

This course was built to provide you with a simple and practical way to learn about OSHA’s Electric Power standards 1910.269 and 1926 Subpart V and provide you with expert insight and interpretations that help you understand the applications of the regulation. Through the use of engaging video and knowledge checks, we break down the performance requirements of the OSHA Electric Power standards and answer frequently asked questions.

We walk you through the OSHA Electric Power regulation by highlighting the key sections, correlating general industry and construction requirements, explaining key definitions and outlining the most important changes and requirements. And, all of this is delivered in an easy-to-navigate, video-driven course that is both engaging and interactive!

Learning Objectives:

The primary goal of Electric Power Standards is for participants to understand how 1910.269 should be reflected in how work is planned and executed at their organizations. To successfully complete the course and accomplish its primary goal, participants must understand:

  • The intent of the standard, who it applies to, and when it applies,
  • Its relationship to other performance and consensus standards; and
  • Specific requirements including standard application, training, information transfer, minimum approach distances, protection from flames and arcs, job briefings, fall protection, grounding, lockout /tagout, deenergizing lines and equipment for employee protection, testing and test facilities, medical services and first aid, two-person rule, live line tools, special conditions, overhead and underground lines and substations

“The courses you teach/offer are first rate; your approach is very comprehensive. My compliments and appreciation for yours, and your colleagues efforts.”

– Andrew G., Safety Coordinator

Register Now

Over 10 hours of Electric Power Specific training!
Self-paced, start anytime, 6-months of access

$750 Non-subscriber / $375 iPi Subscriber


*Not included in the iPi Online Subscription

Earn up to 10 CUSP points for completing the entire online training module

Bonus Peer-to-Peer Discussion Forums

2021 Schedule

In these bonus webinar forums we will provide an opportunity for peer-to-peer networking plus we discuss how to use consensus standards and industry best practices to align your safe work practices with OSHA standards.

11am ET  |  10am CT  |  9am MT  |  8am PT
January 15, 2021
Live Webinar Forum (Included with purchase)
February 19, 2021
Live Webinar Forum (Included with purchase)
March 26, 2021
Live Webinar Forum (Included with purchase)
April 23, 2021
Live Webinar Forum (Included with purchase)
June 18, 2021
Live Webinar Forum (Included with purchase)
July 23, 2021
Live Webinar Forum (Included with purchase)
August 20, 2021
Live Webinar Forum (Included with purchase)
October 15, 2021
Live Webinar Forum (Included with purchase)
December 10, 2021
Live Webinar Forum (Included with purchase)

*INTRODUCTORY PRICING* – $750 Non-subscriber / $375 iPi Subscriber

Self-paced, start anytime, 6-months of access


Matt Edmonds headshot

Matt Edmonds

Matt Edmonds is an adjunct instructor for the Incident Prevention Institute (iPi) and a published author to iP (Incident Prevention) magazine.

Matt is Vice President of SET Solutions, an organization that partners with iPi to provide workplace specific utility training services. He is a Certified Utility Safety Professional (CUSP) and a certified Construction Health & Safety Technician (CHST) and a Certified Instructional Trainer (CIT) with over 15 years of safety management experience. He is an OSHA authorized instructor for General Industry and Construction standards.

Matt provides specialty safety management services for electric power organizations throughout the US. He has been instrumental in the development of training courses designed for electric power organizations including OSHA 10- and 30-hour courses for electric power and for NFPA 70E electrical training and program development services. Matt presently works with utilities and contractors to provide technical and safety specific training, safety perception surveys, site audits and assessments, Root Cause Analysis and safety process evaluation and program development.

Pam Tompkins headshot

Pam Tompkins

Pam Tompkins is a principle instructor for the Incident Prevention Institute (iPi) and a founding member of the USOLN (Utility Safety and Ops Leadership Network). She presently serves on the executive board of the USOLN. She is a regular contributor and published author to iP (Incident Prevention) magazine.

Pam is President and CEO of SET Solutions, an organization that partners with iPi to provide workplace specific utility safety management services. She is a 40-year veteran in the electric utility industry, a member of Institute of Electrical and Electronic Engineers (IEEE) and American Society of Safety Professionals (ASSP).

Pam worked in the utility industry for over 20 years and has provided electric power safety consulting for the last 20 years throughout North America, Caribbean and Central America. She has supported utilities, contractors and other organizations operating electric power systems in designing and maintaining safety improvement methods and strategies for organizational excellence.  She is a Certified Safety Professional (CSP), a Certified Utility Safety Professional (CUSP), a Certified Utility Safety Administrator (CUSA) and an OSHA authorized instructor.

SET Solutions Electric Power Safety Consultants offer a broad spectrum of assessments, consulting and training services to provide safety solutions for a global workplace.

Our tools and support help you build and manage a sustainable safety system. SET Solutions is a full service safety management company that offers specialized assessment, consulting and training services for the electric power industry.
“SET Solutions provided an excellent 1910.269 OSHA assessment for our Corporation. Pam was attentive to detail, had a wealth of industry knowledge, and provided insightful feedback.”
– Jay H., Director of Safety & Technical Training

SET Solutions LLC

Safety + Excellence + Training
SET Solutions, LLC is a BBB Accredited Safety Consultant in Lexington, SC
710 East Main Street, Lexington, SC 29072 
Phone: (803) 407-4707 
[email protected]
Copyright © 2020 - All Rights Reserved