§29 CFR 1910.269

OSHA Electric Power Standards Online

All Sessions are at 11am ET, 10am CT, 9am MT, 8am PT

Electric Power Standards will present §29 CFR 1910.269 Electric Power Generation, Transmission, and Distribution in a simple and practical way, making it easy to interpret and apply.  This course will explain the performance requirements and answer frequently asked questions about key parts of the standard. As part of the course, each participant will receive a copy of the Subpart V final rule along with our OSHA Electric Power Standards Matrix that highlights key sections; correlates general industry and construction requirements; explains key definitions; and outlines important changes and requirements. Anyone with a role in safety, leadership, or operations in the electric utility industry should attend.

The primary goal of Electric Power Standards is for participants to understand how 1910.269 should be reflected in how work is planned and executed at their organizations.  To successfully complete the course and accomplish its primary goal, participants must understand:

  • The intent of the standard, who it applies to, and when it applies;
  • Its relationship to other performance and consensus standards; and
  • Specific requirements including training, information transfer, minimum approach distances, protection from flames and arcs, job briefings, fall protection, grounding, and lockout /tagout

Register for individual sessions or bundle all nine courses!
One Single Session: $100
Bundle All 9 Sessions: $550

Can’t make a live session? On-demand recordings will be available.

Earn up to 9 CUSP points! 1 Point per each 1-hour session

2020 Schedule

All Sessions are at 11am ET, 10am CT, 9am MT, 8am PT
Session 1 – April 7
Electric Power Application and Training Requirements
Session 2 – April 9
Working with Contractors and Information Sharing Requirements
Session 3 – April 14
2-Person Rule and Minimum Approach Distance (MAD) Requirements
Session 4 – April 16
Flames and Electric Arcs Requirements
Session 5 – April 21
Risk Assessments and Job Briefing Requirements
Session 6 – April 23
Fall Protection and Personal Fall Arrest System Requirements
Session 7 – April 28
Grounding for Employee Protection and Mechanical Equipment
Session 8 – April 30
De-energizing Lines and Equipment for Employee Protection and Lockout/Tagout
Session 9 – May 1
Summary / Questions and Answers

One Single Session: $100 -or- Bundle All 9 Sessions: $550

Can’t make a live session? On-demand recordings will be available. 

Instructors

Matt Edmonds headshot

Matt Edmonds

Matt Edmonds is an adjunct instructor for the Incident Prevention Institute (iPi) and a published author to iP (Incident Prevention) magazine.

Matt is Vice President of SET Solutions, an organization that partners with iPi to provide workplace specific utility training services. He is a Certified Utility Safety Professional (CUSP) and a certified Construction Health & Safety Technician (CHST) and a Certified Instructional Trainer (CIT) with over 15 years of safety management experience. He is an OSHA authorized instructor for General Industry and Construction standards.

Matt provides specialty safety management services for electric power organizations throughout the US. He has been instrumental in the development of training courses designed for electric power organizations including OSHA 10- and 30-hour courses for electric power and for NFPA 70E electrical training and program development services. Matt presently works with utilities and contractors to provide technical and safety specific training, safety perception surveys, site audits and assessments, Root Cause Analysis and safety process evaluation and program development.

Pam Tompkins headshot

Pam Tompkins

Pam Tompkins is a principle instructor for the Incident Prevention Institute (iPi) and a founding member of the USOLN (Utility Safety and Ops Leadership Network). She presently serves on the executive board of the USOLN. She is a regular contributor and published author to iP (Incident Prevention) magazine.

Pam is President and CEO of SET Solutions, an organization that partners with iPi to provide workplace specific utility safety management services. She is a 40-year veteran in the electric utility industry, a member of Institute of Electrical and Electronic Engineers (IEEE) and American Society of Safety Professionals (ASSP).

Pam worked in the utility industry for over 20 years and has provided electric power safety consulting for the last 20 years throughout North America, Caribbean and Central America. She has supported utilities, contractors and other organizations operating electric power systems in designing and maintaining safety improvement methods and strategies for organizational excellence.  She is a Certified Safety Professional (CSP), a Certified Utility Safety Professional (CUSP), a Certified Utility Safety Administrator (CUSA) and an OSHA authorized instructor.

SET Solutions Electric Power Safety Consultants offer a broad spectrum of assessments, consulting and training services to provide safety solutions for a global workplace.

Our tools and support help you build and manage a sustainable safety system. SET Solutions is a full service safety management company that offers specialized assessment, consulting and training services for the electric power industry.
WHAT OUR CLIENTS SAY
“SET Solutions provided an excellent 1910.269 OSHA assessment for our Corporation. Pam was attentive to detail, had a wealth of industry knowledge, and provided insightful feedback.”
– Jay H., Director of Safety & Technical Training

SET Solutions LLC

Safety + Excellence + Training
SET Solutions, LLC is a BBB Accredited Safety Consultant in Lexington, SC
710 East Main Street, Lexington, SC 29072 
Phone: (803) 407-4707 
[email protected]
Copyright © 2020 – All Rights Reserved